Layout Image

Little Black Stone

Created by John Collins

Little Black Stone

Little Black Stone

This pattern to imitates the early season Little Black and Brown Stonefly nymphs that are very common here in the Eastern US. The pattern is basically a beadhead Flashback Pheasant Tail nymph, but tied using Dyed Black Pheasant tail and Dyed Black Peacock Herl and a Silver rib instead of the traditional Copper. The Silver Nymph-Head Heavy Metal™ tungsten bead compliments the Silver ribbing and is a great attracter. This is a great pattern to use when these nymphs are ready to hatch into adults, which is near the end of winter (late Feb into March), but it can be used virtually anytime.

Materials:

Hook:                            Dai-Riki 285 # 14 thru #18HM Silver

Thread:                         Black 8/0

Head:                            Silver Nymph-Head Heavy Metal™ tungsten bead (with eyes painted red)

Abdomen:                     Pheasant Tail Fibers dyed Black

Thorax:                        Peacock Herl dyed Black

Tail:                              Pheasant Tail Fibers dyed Black

Rib:                              Size Small Silver wire

Wing case:                    Pearlescent Flashabou , folded back Stonefly style

Step 1:

Step 1

Step 1

Cover the hook shank from bead backwards to midway part of hook and attach the Silver wire, bringing tying thread to just where the hook starts to curve and whip finish once to secure in place.

Step 2:

Step 2

Step 2

Attach the Pheasant Tail fibers to the hook shank (4 to 5 wraps of thread) with tips protruding off hook for tails. Then bring the thread forward about 2/3 of the way back up the hook shank.

Step 3:

Step 3

Step 3

Twist the butt ends of the Pheasant Tail fibers into a rope and proceed to wrap the fibers forward to the stopping point of your thread in step 2. Then tie down the fibers.

Step 4:

Step 4

Step 4

Wrap the wire forward in a reverse fashion across your fibers securing at the point where you secured the Pheasant Tail fibers.

Step 5:

Step by Step 05

Step 5

Now attach the Flashabou wing-case and cover with thread up to the back of the bead.

Step 6:

Step 6A

Step 6A

Step by Step 06B

Step 6B

Now attach three Peacock Herls and wrap forward to the back of the bead and secure with thread.

Step 7:

Step 7A

Step 7A

Step 7B

Step 7B

Bend the wing-case forward and make three thread wraps over Flashabou and pull back the remaining material. At the midway part of your wing-case fold the Flashabou forward again and finish tying down with a whip finish knot.

Step 8:

Step 8

Step 8

Cement the thread and paint the 3D eyes red